document number: 51010 for technica l questions, contact: sfer@vishay.com www.vishay.com revision: 26-jun-07 27 ts6 vishay sfernice multi-turn surface mount miniature 1/4" square ceremt trimmers, fully sealed three variations are available according to the positioning of the control screw and contact positions. the ts6 multi-turn trimmer has been designed for use in pcb surface mounting applications. the cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 m features ? 0.25 w at 85 c ? gam t1 ? military and professional grade ? multi-turn operation ? a low contact resistance variation (down to 2 % rn) ? low end contact resistance (1 typical) ? full sealing ? tests according to cecc 41 000 dimensions in millimeters ts6x ts6z TS6Y recommended soldering areas circuit diagram tolerance unless otherwise specified 0.5 b c ? 0.45 slot 0.5 x 0.5 0.25 5.8 0.10 ? 1.8 0.7 6.85 max 6.85 max 0.20 2.54 2.54 5 max 1 0.10 6.7 max ? 1.8 1.3 0.1 7.6 max 2.54 2.54 ? 0.45 6.85 max 0.25 slot 0.5 x 0.5 6.85 max 5 max 1 0.1 8.85 max 5.3 max c b 1.3 0.1 1 0.10 ? 0.45 a 6.85 ma x 0.3 ? 1.8 8 ma x slot 0.5 x 0.5 2.54 2.54 6.85 max 5 max 6.85 max 6.7 max 1 2.54 2.54 7.5 c b a 3 3 b c a 9.3 2.54 2.54 1 2.54 2.54 1 7.5 c b a 3 a c b cw (2) (3) (1) rohs compliant
www.vishay.com for technical ques tions, contact: sf er@vishay.com document number: 51010 28 revision: 26-jun-07 ts6 vishay sfernice multi-turn surface mount miniature 1/4" square cere mt trimmers, fully sealed mechanical specifications mechanical travel 15 turns 5 operating torque (max. ncm) 1.5 end stop torque clutch action unit weight (max. g) 0.5 wiper (actual travel) positioned at approx. 50 % environmental specifications temperature range - 55 c to + 155 c climatic category 55/125/56 sealing fully sealed container solder immersion ip67 power rating chart electrical specifications resistive element cermet electrical travel 13 turns 2 resistance range 10 to 2 m standard series e3 and series 1 - 2.2 - 4.7 and 1 - 2 - 5 tolerance standard 10 % on request 5 % power rating linear 0.25 w at 85 c temperature coefficient see standard resistance element data limiting element voltage (linear law) 250 v contact resistance variation 2 % rn or 2 end resistance (typical) 1 dielectric strength (rms) 1000 v insulation resistance 10 6 m 0.25 0.125 0 0 50 85 100 155 ambient temperature in c rated power in w performance cecc 41100 typical values and drifts tests conditions rt rt (%) requirements r 1-2 r 1-2 (%) rt rt (%) r 1-2 r 1-2 (%) climatic sequence phase a dry heat 125 c phase b damp heat phase c cold - 55 c phase d damp heat 5 cycles 2 % 3 % 0.5 % 1 % long term damp heat 56 days 40 c 93 % rh 2 % 3 % 0.5 % 1 % dielectric strength: 250 v rms insulation resistance: > 100 m dielectric strength: 1000 v rms insulation resistance: > 104 m rotational life (electrical, mechanical) 200 cycles at rated power 2 % (2 % + 3 ) contact res. variat.: < 3 % rn contact res. variat.: < 1 % rn load life 1000 h at rated power 90?/30? - ambient temp. 85 c 2 % 4 % 1 % 2 % contact res. variat.: < 3 % rn contact res. variat.: < 1 % rn thermal shock 5 cycles - 55 c to + 125 c 1.5 % v 1-2 v 1-3 1 % 0.5 % v 1-2 v 1-3 < 1 % shock 50 g at 11m secs 3 successive shocks in 3 directions 1 % 2 % 0.1 % 0.2 % vibration 10 - 55 hz 0.75 mm or 10 g for 6 hours 1 % v 1-2 v 1-3 2 % 0.1 % v 1-2 v 1-3 < 0.2 %
document number: 51010 for technica l questions, contact: sfer@vishay.com www.vishay.com revision: 26-jun-07 29 ts6 multi-turn surface mount miniature 1/4" square cere mt trimmers, fully sealed vishay sfernice marking printed: vishay trademark, mo del, style, ohmic value (in , k , m ), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. soldering recommendation soldering cycle: 10 s at 220 c max or with an 40 w iron; 3 s at 350 c. soldering is recommended by reflow or vapor phase. standard resistance element data standard resistance values linear law typical tcr - 55 c + 125 c max. power at 8 5 c max. working voltage max. wiper cur. wvmappm/c 10 22 47 100 220 470 1k 2.2k 4.7k 10k 22k 47k 100k 220k 470k 1m 2m 0.25 0.25 0.13 0.06 0.03 158 2.34 3.43 5 7.42 10.8 15.8 23.4 34.3 50 74.2 108.4 158 234 250 250 250 158 107 73 50 34 23 15.8 10.7 7.3 5 3.37 2.31 1.58 1.97 0.53 0.25 0.125 100 packaging - x, y and z types: on tape and reel (dia. 330 mm) of 500 pieces: tr - in magazine pack by 50 pieces (tube) code ?tu? ordering information ts6 model y style 470 k ohmic value 10 % tolerance tu50 pac k ag i n g e3 lead finish tu50: tube on request - tr500: tape and reel e3: pure sn sap part numbering guidelines ts 6y 4 74kt2 0 mode l style ohmi c v alu e to l pa ckagi n g code special (if applicable) see the end of this data b ook for con v ersion ta b les
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
